Before using Essia, wash your face, making sure to remove makeup and surface-layer debris. then, apply your favorite moisturizer, serum or water.
To turn Essia on, press and hold the Power Button.
Then, continue to press the button until you've selected the mode you would like to use.
Note: If not used, Essia will turn off after 15 seconds.
To exfoliate, gently press the back of the wand head against your moisturized (or damp) skin at a 30-degree angle and begin slowly moving the wand forward. You'll notice the ultrasonic waves and wand head loosening blackheads and clearing away dead skin and dirt.
Looking to make the most of your favorite moisturizers and serums? Just apply the product of your choice and activate Moisturize Mode. Then, press the front of the wand head to your skin at a 30-degree angle, slowly moving the wand backwards. Make sure to hold both side panels when using this mode—it completes the EMS circuit and allows the micro-current to better penetrate your skin, stimulating your cells and enhancing the absorption of your skincare product.
To firm and tighten your skin, grip the wand facing downwards and press the front of the wand head to your skin at a 30-degree angle, slowly moving the wand upwards. Like Moisturize Mode, make sure to hold both side panels to complete the EMS circuit, allowing the micro-current to penetrate your skin, stimulating your cells and, with the gentle pulse of ultrasonic vibrations, helping to reduce the appearance of fine lines and wrinkles.
Feel free to use each mode for two or more minutes but make sure not to exceed six minutes
Use Essia once or twice a week (depending on your skin's sensitivity)
After using Essia, continue with your daily routine (toners, lotions, etc.)
To charge Essia, place the wand on the charging base and connect the AC adapter.
While charging, the wand's light will flash red
Once charged, the light will turn solid blue